4/19/2021 0 Comments Inroads Ss4 Tutorial
Being a surveyor myself I know how much surveyors enjoy change so I thought I would share some of these with you.
Inroads Ss4 Tutorial Code Would HaveFor an InRoads example, prior to OpenRoads, to start a line with a curve the control code would have been ST PC.If you want to take a shot for a curve that is Non-Tangent the code would have been PC NT now it is NTC.Linking Codes provide the best and most robust options for completing the planimetrics as they look in the field. Linking Codes are placed after a Feature Code and should use the Alpha values. Linking codes can be accessed from the Survey Settings under the Project Settings category of the Civil Standards tab. They can also modify the location of observations by moving the final coordinate location. Control Codes must follow the Feature Code and only Alpha Control Codes are available. If more than one Control Code is used it must be separated by a space. Dual coding features with Control Codes in the same line is not recommended as it applies the Control Code to both Feature Codes. ![]() A Positive number turns 90 degrees right a Negative number turns left 90 degrees. For example STEPS will not work as desired because the first 2 letters (ST) will be interpreted as a control code. There will be a lot of setup in your Survey Settings for OpenRoads and there are work-arounds for having linking codes in your feature codes. For help getting your Survey resources configured correctly for efficient use, please contact us. This just needs the use of the Substitute Strings option found inside of Civil Standards - Project Settings - Survey - - inside of properties, Data File Parsing - Substitute Strings. They should be listed in Red as different instead of Blue as New. ![]() It appears to attempt to make it tangent to the new figure, which results in the creation of a semi-circle and not a straight line as InRoads (and Civil 3D) does. The only solution I have found is to add the start of a new figure, using a sequence number before the JPT. Change EPR ST PC JPT1510 to EPR ST PC ST EPR1 JPT1510 to get a straight line from the PC ST to the JPT point.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |